With the improvement of people's living standards, humans have requirements for the comfort of the outdoor environment. Of course, outdoor leisure furniture is also one of the indispensable outdoor facilities. We have seen various outdoor leisure furniture, but the most fashionable is rattan wicker furniture. Rattan wicker furniture is widely used by designers in outdoor environments. Designers should not only consider the coordination between outdoor leisure furniture and outdoor environments, but also durability. When we design outdoor leisure furniture, we need to know several major production processes that affect the quality of PE rattan furniture.

　　First, the preliminary work needs to draw component drawings, and then enter the frame proofing of the modeling after grasping the overall ratio.

　　When making PE rattan furniture frames, not only the appearance of the finished product afterward but also the firmness of the structure must be considered. It is not only necessary to pursue the beauty of its appearance but to ignore the firmness of the structure.

　　Second, the frame of rattan wicker furniture and the selection of PE rattan.

　　The frame of PE rattan furniture is made of aluminum alloy with a thickness of 1.2mm or more according to the industry standard. Some manufacturers use thin aluminum alloy or iron frames to reduce the cost. Too thin aluminum alloy tubes will affect the later weaving and cause the deformation of the frame. When the iron pipe is made, rust will occur after the product is put into use, which will cause the frame to collapse, which will affect the service life. The choice of rattan is also important. We need to choose PE rattan made of new PE material.

　　Third, the welding of the frame and the polishing of the welding port.

　　The welding of the aluminum frame needs to be welded in all directions, and the pipe and the pipe interface need to be flat and tight. The weld joint will inevitably appear higher than the pipe position during welding. We need to polish it so as not to affect the smoothness of the later weaving rattan.

　　Fourth, the shaping of the frame and the spraying of high-temperature baking paint.

　　The shaping of the aluminum alloy frame is also an important process. Generally, the shaping needs to be placed on a horizontal tempered glass table. Correct the non-parallelism and asymmetry of the shelf through plastic surgery. Many people have asked why aluminum alloy frames do not rust, so why do they need to be sprayed with high-temperature baking paint? Spraying high-temperature baking varnish is to confirm the color of the shelf according to the color of different rattans. Spraying high-temperature baking varnish is to unify the color of the rack and the rattan because the woven rattan has gaps from different angles. When the aluminum-white aluminum alloy frame is different from the rattan, it will affect the appearance of the product.

　　Fifth, the weaving of PE rattan and the installation of accessories.

　　When weaving rattan, we need to achieve the four basic elements of density, tightness, firmness, and flatness. Too loose, too loose rattan will affect the service life of later products. The unevenness of the rattan surface mainly affects the aesthetics and the comfort of use.

　　Sixth, rattan wicker furniture waterproof cloth cushion production.

　　Seventh, the packaging of rattan wicker furniture.